home *** CD-ROM | disk | FTP | other *** search
- Sysop ( EDIT THIS FILE TO INDICATE YOUR BBS Callsign & Address OPTIONS )
- -------------------------------------------------------------------------------
- Two formats may be used with the BBcopy Re-dist server.
-
- The REDIST compatible format will require you to address your (P)ersonal
- message to the following addresses:
-
- Address To Flood @Address
- LOCBBS@ThisBBS.#lan.hroute. This BBS only W1NPR
- LOCAL@ThisBBS.#lan.hroute. Nearby BBSs / Lan etc. SRQLAN
- REGION@ThisBBS.#lan.hroute. State/Province/Etc. FLBBS
- LOCBBS@ThisBBS.#lan.hroute. Country the BBS is in ALLUSA
-
- All REDIST type messages will be (B)ulletins and addressed to ALL by default.
- To alter the TO address Enter the desired address at the beginning of the
- Subject/Title line prefixed with an # as in
- #USER Regular Subject of message
- This will cause the message to be addressed to USER@Address with the Subject
- as the remaining part of the title line.
- -----------------------------------------------------------------------------
- To use the more flexible BBcopy format, messages should be sent to
-
- BBcopy@Thisbbs with a regular Subject/Title line
-
- The Originating user's Subject/Title will follow in the reproduced messages.
- Both (P) & (T) messages will be reproduced, any other type will be sent as (P)
- except when using (B)ulletin option below.
-
- The Full text as well as the full Copy to: distribution list will be in the
- reproduced messages **** unless the option below is used ****.
-
- The message to BBcopy will be killed, a return message will be sent to the
- original user telling of the distribution
-
- Users should send a message to BBcopy@Thisbbs and MUST include as the very
- last lines, after all text trailers ect. the following words exactly as the
- first words on a line as follows upper or lower case will work ":" is needed
-
- Copy to:
-
- Followed by the stations who are to receive the message, one to a line.
-
- If complete addresses are available provide them although when REBBS
- does a normal Hlookup they should be addressed OK if the stations are known in
- the distribution BBS's Hlookup.bb file
-
- An @BBS is a requirement even if the messages will be @W1NPR
-
- An example would be:
-
- Copy to:
- W2TKU@W2TKU.#SRQFL.FL.USA.NA
- WD4NKZ@WD4NKZ.#SRQFL.FL.USA.NA
- W1TTY@KQ1K.#EMA.MA.USA.NA
- K4JVY@WD4NKZ.#SRQFL.FL.USA.NA
-
- ==============================================================================
- Options:
-
- If you use "Copy text to:" instead of Copy to: then only the text will be
- copied into the messages, otherwise the Copy to: list will also be sent.
-
- Example:
-
- Copy text to:
- W2TKU@W2TKU.#SRQFL.FL.USA.NA
- WD4NKZ@WD4NKZ.#SRQFL.FL.USA.NA
- W1TTY@KQ1K.#EMA.MA.USA.NA
- K4JVY@WD4NKZ.#SRQFL.FL.USA.NA
-
- -------------------------------------------------------------------------------
-
- If you use "Copy bulletin to:" instead of Copy to: then one (1) copy of the
- message will be copied as a Bulletin to the first address on the list. In all
- other cases all messages will be "P" The Copy bulletin to: list will not be
- sent.
- Valid flood designators for this BBS are ALLUSA, USBBS, SRQLAN, CCLAN, NEBBS
-
- Example:
-
- Copy bulletin to:
- REBBS@USBBS
-
- -------------
- Note, This will allow you to send a bulletin for local distribution to
- a distant BBS as a (P) message so it will not be left & read at each BBS
- along the way.
- ==============================================================================
- A message to BBcopy@Thisbbs with a Subject H will get this help file.
-
- Message with no list to copy to will get a reply indicating this along with
- this help file.
-
-